Mitsubishi Electric AE-50A Instruction Book page 71

Item
Energy management
data
WT07139X02
■ File output destination
[Save destination]\[Serial No.]\"OperationalData"\"EnergyManagement2"\[Date]
Note: The date will appear in the format that has been set on the Basic System settings
screen, accessible via the Web Browser for Initial Settings.
Note: If the AE-200/AE-50/EW-50 software version is before Ver. 7.2, the file output
destination is [Save destination]\[Serial No.]\"OperationalData"\"EnergyManagement"\
[Date].
■ File format
[Data type: 5-minute intervals]
Row Item
1st File Type
2nd Data range *1
3rd Item *2*3*4
Measurement
4th
unit *2*6*7*8
5th–
Data *2*3*4*9*10
17860th
*1 The date will appear in the format that has been set on the Basic System settings screen, accessible
via the Web Browser for Initial Settings.
*2 The separator character and decimal point character selected on the Measurement screen
(accessible via the Web Browser for Initial Settings) will be used to the data.
*3 The numbers shown after "MCP" and "MCT" indicate channel No.
*4 The numbers in the parentheses indicate M-NET addresses.
*5 The M-NET address indicated in the parentheses will not appear for the measurement data of the
built-in PI controller.
*6 The temperature unit °C or °F will appear, depending on the temperature unit that has been selected
on the Basic System settings screen, accessible via the Web Browser for Initial Settings.
*7 The measurement unit for MCP (PI controller) will be the measurement unit that has been set on the
Measurement screen, accessible via the Web Browser for Initial Settings.
*8 The measurement item for MCT (AI controller) will be temperature or humidity, which has been set
on the Measurement screen, accessible via the Web Browser for Initial Settings.
*9 The value will not appear if the data does not exist.
*10 Each file contains up to 17856 data (2-month worth of data).
Description
501
Start date + "–" + End date
"DateTime,Data1(51),...Data1(100),Data2(51),...Data2(100),
Data3(51),...Data3(100),OutdoorTemp(51),...OutdoorTemp(100),
CoolSetTemp(1),...CoolSetTemp(50),HeatSetTemp(1),...HeatSetTemp(50),
RoomTemp(1),...RoomTemp(50),MCP1(0),...MCP1(50),
MCP2(0),...MCP2(50),MCP3(0),...MCP3(50),MCP4(0),...MCP4(50),
MCT1(1),...MCT1(50),MCT2(1),...MCT2(50),
AHC1(201),...AHC1(250),AHC2(201),...AHC2(250),
*5
MCP1,MCP2,MCP3,MCP4 "
Item
Data1, Data2, Data3
OutdoorTemp, CoolSetTemp, HeatSetTemp,
RoomTemp
MCP (PI controller/Built-in PI controller)
MCT (AI controller)
AHC (Advanced HVAC CONTROLLER)
*1
Date and time, Data 1 (51), ... (100), Data 2 (51), ... (100), Data 3 (51), ... (100),
Outdoor temperature (51), ... (100),Cooling set temperature (1), ... (50),
Heating set temperature (1) , ... (50),Room temperature (1), ... (50),
MCP 1 (1), ... (50), MCP 2 (1), ... (50), MCP 3 (1), ... (50), MCP 4 (1), ... (50),
MCT 1 (1), ... (50), MCT 2 (1), ... (50),AHC temperature 1 (201), ... (250),
AHC temperature 2 (201), ... (250), MCP 1, MCP 2, MCP 3, MCP 4
71
Format
Unit
-
ºC, ºF
kWh, m3, MJ
ºC, ºF, %
ºC, ºF