Mitsubishi Electric AE-50A Instruction Book page 40

Item
Display item
Refresh screen
Graph region
Target value
Measurement unit/
scale
WT07139X02
Select an item to display its data in the ranking graph.
Note: The selectable items vary, depending on the items selected in the [Display range] field.
Display item
Electric Energy (kWh)
Fan operation time (min)
Thermo-ON time (Total) (min)
Thermo-ON time (Cool) (min)
Thermo-ON time (Heat) (min)
Click to show the graph created based on the specified criteria.
Note: No graph will appear if no data that meet the specified criteria exist.
Ranking graph will appear in descending order of the value of the selected display item.
Cumulative value
(Yellow)
Note: "Cumulative value
selected in the [Display item] field.
A red triangle mark will appear to indicate a target value.
Note: Target value will appear only when [Block] is selected in the [Display range] field and [Electric
Energy] is selected in the [Display item] field.
Note: Target value will not appear when the target value is not set or set to "0".
The graph shows the measurement unit that is suitable for the selected Display item, and scale
that is automatically adjusted to show the full range of data.
Description
Display items
Address
V
V
V
V
V
Cumulative value
(value exceeded the target value)
(Orange)
(value exceeded the target value)
40
Display range
Group Block
V V
V -
V -
V -
V -
V: Item that can be displayed in the graph
Target value
(Gray frame + red triangle)
" will appear when [Electric Energy] is