Maintenance; Send Mail Log - Mitsubishi Electric AE-50A Instruction Book

9. Maintenance

9-1. Send Mail Log

Click [Maintenance] in the menu bar, and then click [Send Mail Log] to access the Send Mail Log screen. A list of
error notification e-mail that have been sent will appear.
Error notification e-mail function is the function to send the error information to the specified e-mail addresses. To
use this function, e-mail settings must be configured on the Web Browser for Initial Settings.
Update
Click to show the most
recent log.
Sent date and time
Error source unit address
Item
Update
Clear Log
Sent date and time
Error source unit address
Error Code
Error Status
Sent Mail Status
WT07139X02
Click to show the most recent e-mail log.
When [Auto] is selected, the e-mail log is updated automatically every minute.
Click to clear the e-mail log.
The date and time when the e-mail was sent will appear.
The address of the unit in error will appear.
Note: When an error occurs on a general equipment connected to PLC Software for
General Equipment, PLC number* (1 to 20) and connection number of the general
equipment (1 to 32) will appear. (Example: PLC1-32)
* PLC number indicates the row number on the [PLC Connection] screen,
accessible from the [E-mail] screen on the Web Browser for Initial Settings.
Note: When an error occurs on the general equipment connected via DIDO controller,
M-NET address of the DIDO controller will appear. (The recipients will know that an
error has occurred on one of the general equipment that is connected to the DIDO
controller.)
The error code that corresponds to the error will appear.
Occurred: The e-mail was sent when an error occurred.
Resolved: The e-mail was sent when the error was resolved.
Sent: The e-mail was successfully sent.
Failed: The e-mail failed to be sent.
Description
62
Clear Log
Click to clear the e-mail log.
Error Code
Sent Mail Status
Error Status