Menu Structure Display - Maico WRG 180 EC Mounting And Operating Instructions

I5 Switch cable level 2.
Defines which position of the step switch
corresponds to cable 2 from the central
controller.
I6 Switch cable level 3.
Defines which position of the step switch
corresponds to cable 3 from the central
controller.
I7 Pressure imbalance permitted?
Here the definition is made whether, for
example, the frost protection may access
the pressure balance.
I8/ I9/ I11/ I12 and I14
Have no function for the WRG 180 EC.
I10 Constant pressure switched off.
This is the setting that defines whether
the ventilation and air extraction units
always work with constant volumetric
flow or whether they switch over to
constant pressure operation if a
particular resistance is exceeded.
I13 Filter message.
This setting defines whether the filter
notification should appear on the display.
Please refer to the table in section 6.6.3 for
the factory settings.

6.4 Menu structure display

The menu structure is divided up into a
display and a setting part.
The number of visible parameters is
dependent on the parameter set. There is the
"User" parameter set for the user while there
is a more extensive "Installer" parameter set
for the installer. It can be activated and
deactivated by pressing and holding the "F"
and "OK" buttons down together for 1
second.
18