Table of Contents
Advertisement
DocuMate 742
Appendix D: Electrical Information
Warning - Electrical Safety Information
1.
The power receptacle for the machine must meet the requirements stated on the data
plate on the rear of the machine. If you are not sure that your electrical supply meets the
requirements, please consult your local power company or an electrician for advice.
2.
The socket outlet shall be installed near the equipment and shall be easily accessible.
3.
Use the power cable that is supplied with your machine. Do not use an extension cord or
remove or modify the power cord plug.
4.
Plug the power cable directly into a correctly grounded electrical outlet. If you are not sure
whether or not an outlet is correctly grounded, consult an electrician.
5.
Do not use an adapter to connect any Xerox equipment to an electrical outlet that lacks a
ground connection terminal.
6.
Do not place this equipment where people might step or trip on the power cable.
7.
Do not place objects on the power cable.
8.
Do not override or disable electrical or mechanical interlock devices.
9.
Do not push objects into slots or openings on the machine. Electrical shock or fire may
result.
Electrical Supply
1.
This product shall be operated from the type of electrical supply indicted on the product's
data plate label. If you are not sure that your electrical supply meets the requirements,
please consult your local power company for advice.
2.
WARNING:
This equipment must be connected to a protective earth circuit. This
equipment is supplied with a plug that has a protective earth pin. This plug will only fit into
an earthed electrical outlet. This is a safety feature. If you are unable to insert the plug into
the outlet, contact your electrician to replace the outlet.
3.
Always connect equipment to a correctly grounded power outlet. If in doubt, have the
outlet checked by a qualified electrician.
Disconnect Device
The power cable is the disconnect device for this equipment. It is attached to the back of the
machine as a plug-in device. To remove all electrical power from the equipment, disconnect the
power cable from the electrical outlet.
User's Guide
Appendices
7-3
Advertisement
Table of Contents
Troubleshooting
