Configuring The One Touch Buttons; Changing A Button Setting - Xerox DocuMate 3115 User Manual

Configuring the One Touch Buttons

When you installed the scanner, the software configured each One Touch button with appropriate
settings consisting of: a Destination Application, a Scan Configuration, and a File Format.
1. Click on the One Touch icon.
2. Right-click a button on the One Touch Button Panel.
3. The One Touch Properties window opens.
One Touch Icon
Right-click on a button (for example, button
1) and the Properties window opens for that
button.
The One Touch Properties window will also open when you press, hold down for 3 seconds, and release
the Simplex or Duplex button.
Some of the options on the One Touch Properties Window are "grayed out" and are not
NOTE:
available, these options are not appropriate for your scanner model.

Changing a Button setting

1. Click on an application name in the Select Destination list.
2. Select a file format in the Select Format panel.
3. Select a scanning configuration in the Select Configuration list.
4. Click on OK to save the changes.
5. Place a page in the scanner.
6. Click on the button that you made the changes for.
7. The scanner starts scanning and sends the image to the application, with the file format and
scanning configuration you specified.
The next section contains detailed information on making changes to the One Touch Properties
NOTE:
window.
DocuMate 3115 39
User's Guide