Scan From The One Touch Buttons - Xerox DocuMate 3115 User Manual

The AutoLaunch feature is now turned off. Your scanner will not start scanning until you click on the
scan button on the One Touch button panel, or on the scanning interface from the application you are
using.
To turn AutoLaunch back on, follow the instructions in this section and click on the option in step 4 to
select to enable the feature.
• Paper pickup delay—If the AutoLaunch option is enabled, the Paper pickup delay option also
becomes available. The Paper pickup delay is the amount of time you want the scanner to wait
until it feeds the item into the scanner to start scanning.

Scan from the One Touch Buttons

Scanning using the buttons on the scanner works like inserting a page in the scanner when AutoLaunch
is turned on.
1. Turn the control dial to the setting you want to use to scan, align the number to the registration
mark on the scanner.
Place an item face down, on the front feed tray, aligned to the registration marks on the tray and
2.
insert it into the front of the scanner.
Registration mark
DocuMate 3115 31
User's Guide