Setting The Ip Address From The Front Panel - Xerox Phaser 860 Networking Setup Manual

Setting the IP Address From the Front Panel

1. With highlighted, press the OK key.
Menus
2. Press the Scroll Down key to scroll to the
3. Press the OK key.
4. Scroll to
TCP/IP
5. Press the OK key.
6. Press the Scroll Down or Scroll Up key to scroll to the correct number for the first
digit of the address, then press the OK key to accept that digit.
7. Repeat step 5 for each remaining digit.
8.
Scroll to
TCP/IP Network
9. Press the Scroll Down or Scroll Up key to scroll to the correct number for the first
digit of the address, then press the OK key to accept that digit.
10. Repeat step 9 for each remaining digit.
11. Scroll to
TCP/IP
12. Press the Scroll Down or Scroll Up key to scroll to the correct number for the first
digit of the address, then press the OK key to accept that digit.
13. Repeat step 12 for each remaining digit.
14. To exit the menu system, scroll to
Networking Setup Guide
Address.
Mask.
Gateway.
and press the OK key.
Exit
Setting the Printer's IP Address
Network Setup Menu.
15