Xerox Phaser 7760 Advanced Features Manual page 55

Enabling or Using TCP/IP or AppleTalk for Mac OS X, Version
10.2 and Higher
Verify that you are running Mac OS X, version 10.2 or higher. The previous versions of
Mac OS X do not fully support PostScript printing and printer features.
Setting Up the Macintosh Ethernet Port for TCP/IP
To set up your Macintosh for TCP/IP:
1. Select Network from the System Preferences application.
2. Select Built-In Ethernet from the Show menu.
3. Specify how you will obtain the IP address from the TCP/IP tab:
■ Manually: Specify the IP address, Subnet Mask, Router Address, and Name Server
Address in the dialog box.
■ Using DHCP: Automatically finds the IP address.
4. Click Apply, and then close the dialog box.
See also:
Knowledge Base at www.xerox.com/office/7760support
Setting Up the Macintosh Ethernet Port for AppleTalk
To set up your Macintosh for AppleTalk:
1. Select Network from the System Preferences application.
2. Select Built-In Ethernet from the Show menu.
3.
Select Make AppleTalk Active in the AppleTalk tab.
4. Click Apply, and then close the dialog box.
Creating an LPR Printer with Mac OS X, Version 10.2 and Higher
To create an LPR printer:
1.
Open the Print Center utility. In Mac OS X, version 10.3 or higher, open the Printer
Setup Utility. The utility is located in a directory called Utilities in the Applications
directory.
2. Select Add, then select one of the following options:
■ Version 10.2: Select IP Printing from the pull-down menu.
Version 10.3 and higher: Select LPD/LPR in the Printer Type field.
■
3.
Enter the printer's IP address in the Printer Address field.
4. Select the appropriate PPD from the list in the Printer Model pull-down list. If your
printer PPD is not listed, install it from the Software and Documentation CD-ROM.
5. Click Add to complete the configuration.
Phaser® 7760 Color Laser Printer
3-17
Macintosh