Xerox Phaser 7760 Advanced Features Manual page 74

Changing the Load Paper Timeout
When your print job is formatted for a type or size of paper that is not loaded in the printer, the
printer's control panel displays a message requesting you to load the appropriate paper. The
Load Paper Timeout value controls the amount of time the printer waits before printing on
another type or size of paper.
To change the Load Paper Timeout value, use one of the following options:
The printer's control panel
■
■ CentreWare IS
Using the Control Panel
To change the Load Paper Timeout value on the control panel:
1. Select
Printer Setup
2. Select
Paper Handling Setup
3. Select
Load Paper Timeout
4. Scroll to the desired timeout value. The values (
hours) indicate the length of time you want the printer to wait for you to load paper
24
before printing. If you select a value of
inserted and immediately picks paper from the default tray.
5. Press the OK button to save the change.
Using CentreWare IS
To change the Load Paper Timeout value using CentreWare IS:
1.
Launch your web browser.
2.
Enter your printer's IP address in the browser's Address field (http://xxx.xxx.xxx.xxx).
3. Click Properties.
4.
Select the General folder on the left sidebar, and then select Printer Defaults.
5.
Scroll to the desired Load Paper Timeout value in Timeout Settings. The values (None,
1, 3, 5, or 10 minutes, 1 or 24 hours) indicate the length of time you want the printer to
wait for you to load paper before printing. If you select a value of None, the printer does
not wait for paper to be inserted and immediately picks paper from the default tray.
6. Click the Save Changes button at the bottom of the screen.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
None
Phaser® 7760 Color Laser Printer
4-13
, , , , or minutes,
None 1 3 5 10
, the printer does not wait for paper to be
Printer Settings
hour or
1