Printing Transparencies From Tray 2 - Xerox Phaser 7750 Reference Manual

Printing Transparencies from Tray 2

1. Fan the transparencies to release sheets that may stick together.
2.
Insert the transparencies long-edge feed into Tray 2.
Note
Do not load paper above the fill line inside the tray.
3. Adjust the paper guides to the size of the transparencies.
Selecting Front Panel Settings to Print Transparencies
1.
At the printer's front panel, do one of the following:
■ Press the OK button if both
paper size are selected. Go to Step 4.
Change
■ Select
the OK button. Go to Step 2.
2. Phaser 45-Series Transparency,
Select
3.
Select one of the following paper size options:
■ The paper size displayed or
■ Custom: Requires you to select custom width and custom height values.
4. In the printer driver, select either the paper type or Tray 2 as the paper source.
Phaser 45-Series Transparency
if a different paper type or incorrect paper size is selected, then press
then press the OK button.
Auto-Sensed
Phaser® 7750 Color Laser Printer
2-50
Transparencies
7750-097
7750-158
and the correct