Xerox Phaser 7750 Reference Manual page 95

2.
Insert photo paper long-edge feed into Tray 1 (MPT). Place the side to be printed
facedown.
Note
Do not load paper above the fill line inside the tray.
3. Adjust the paper guides to the size of the paper.
Selecting Front Panel Settings to Print Photo Paper
1. At the printer's front panel, do one of the following:
■ Press the OK button if both
selected. Go to Step 4.
■ Change
Select
the OK button. Go to Step 2.
2. Phaser Photo
Select
3. Letter (8.5 x 11.0
Select
button to save your selection.
4. In the printer driver, select the paper type or Tray 1 (MPT) as the paper source.
MAX
Phaser Photo Paper
if a different paper type or incorrect paper size is selected, then press
Paper, then press the OK button.
in.), Custom, or
Phaser® 7750 Color Laser Printer
2-61
7750-162
and the correct paper size are
A4 (210 x 297 mm), then press the OK
Specialty Paper