Printing Transparencies From Tray 1 - Xerox 6200DX - Phaser Color Laser Printer Paper Manual

Note
Xerox and Xerox Phaser transparency films developed for other Xerox printers and copiers
are not meant to be used with this printer. Using non-Phaser 6200 transparencies may
damage the fuser and might not be covered under the warranty.

Printing transparencies from Tray 1

1. Fan the transparencies to release sheets that are stuck together.
2. Insert the transparencies into the tray. For more information, refer to the Trays section of the
Trays and Paper Guide on the Interactive Documentation CD-ROM.
3. Do not load transparencies above the transparency fill line, because it may cause a jam.
4. When the front panel prompts you to confirm or change the selected paper type:
a. Press the Down Arrow key to scroll to
b. Scroll to
Transparency
5.
In the printer driver, select either Tray 1 as the paper source or Transparencies as the paper type.
Phaser® 6200 Color Laser Printer
, then press the OK key.
Change
and press the OK key to save your selection.
Specialty Printing
MAX
MAX
6200-59
16