Chapter 2: Safety; General Safety; Before Operation Safety - Toro 03952 Operator's Manual

General Safety

• This product is capable of amputating hands and feet and of throwing objects.
• Read and understand the contents of this Operator's Manual before starting the engine.
• Use your full attention while operating the machine. Do not engage in any activity that
causes distractions; otherwise, injury or property damage may occur.
• Do not put your hands or feet near moving components of the machine.
• Do not operate the machine without all guards and other safety protective devices in
place and functioning properly on the machine.
• Keep bystanders and children out of the operating area. Never allow children to operate
the machine.
• Shut off the engine, remove the key, and wait for all movement to stop before you leave
the operator's position. Allow the machine to cool before adjusting, servicing, cleaning, or
storing it.
Improperly using or maintaining this machine can result in injury. To reduce the potential for
injury, comply with these safety instructions and always pay attention to the safety-alert
symbol , which means Caution, Warning, or Danger—personal safety instruction. Failure
to comply with these instructions may result in personal injury or death.

Before Operation Safety

• Never allow children or untrained people to operate or service the machine. Local
regulations may restrict the age of the operator. The owner is responsible for training all
operators and mechanics.
• Become familiar with the safe operation of the machine, operator controls, and safety
signs.
• Before you leave the operator's position, do the following:.
– Park the machine on a level surface
– Disengage and lower the cutting units.
– Engage the parking brake.
– Shut off the engine and remove the key.
– Wait for all movement to stop.
– Allow the machine to cool before adjusting, servicing, cleaning, or storing it.
• Know how to stop the machine and shut off the engine quickly.
• Do not operate the machine without all guards and other safety protective devices in
place and functioning properly on the machine.
Safety Page 2–1
Chapter 2
Safety
3464-482 A