Toro 03952 Operator's Manual page 71

Understanding the Diesel-Particulate Filter and
Regeneration (continued)
3. At the R
performing the parked regeneration or 1/2 tank of fuel if you are performing the recovery
regeneration. Verify that the parking brake is engaged and the engine speed is set to
low idle. Press the select button to continue.
4. At the I
5. The InfoCenter displays the I
Note:
6. The InfoCenter displays the time to complete message.
7. The InfoCenter displays the home screen and the regeneration acknowledge icon
appears
Note:
temperature icon
8. When the engine computer completes a parked or recovery regeneration, the
InfoCenter displays an advisory. Press any button to exit to the home screen.
Note:
exit to the home screen.
Canceling a Parked or Recovery Regeneration
Use the P
ARKED
or recovery regeneration process.
1. Access the DPF Regeneration menu, scroll to
Parked Regen or Recovery Regen.
2. Press the select button to cancel a Parked
Regen or a Recovery Regen.
3464-482A
P screen, verify that you have 1/4 tank of fuel if you are
EGEN ARAMETERS
DPF R screen, select the next button to continue.
NITIATE EGEN
If needed, press the cancel icon to cancel the regeneration process.
.
While the DPF regeneration runs, the InfoCenter displays the high exhaust-
.
If the regeneration fails to complete, follow the advisory and press any button to
R C or R
EGEN ANCEL
DPF R message.
NITIATING EGEN
R C
ECOVERY EGEN ANCEL
G483825s
Page 5–27
setting to cancel a running parked
Operation: During Operation