Table of Contents
Advertisement
Operating Tips (continued)
– Do not use Economy Mode.
– Use the InfoCenter display to monitor both engine coolant and generator
temperatures.
– Frequently check the rear radiator screen and the air cleaner air inlet screen above
the radiator for chaff build up.
– Smart Power progressively limits the maximum mowing speeds as the generator and
reel motors approach their temperature limits, optimizing productivity by preventing
the components from overheating.
– If the engine, generator, or reel motors overheat, park the machine in a shaded area
with good air flow to let the components cool.
Maintaining the Machine after Mowing
Complete the following steps after mowing:
1. Thoroughly wash the machine with a garden hose with no nozzle to avoid contamination
and damage to the seals and bearings caused by excessive water pressure.
2. Ensure that the radiator and oil cooler are kept free of dirt or grass clippings.
3. Inspect the machine for possible hydraulic-fluid leaks, damage, or wear to the hydraulic
and mechanical components, and check the cutting-unit blades for sharpness.
Transporting the Machine
Disengage the PTO and raise the cutting units to the T
driving between objects so you do not accidentally damage the machine or cutting units.
Use extra care when operating the machine on slopes. Drive slowly and avoid sharp turns
on slopes to prevent rollovers. Lower the cutting units when going downhill for steering
control.
3464-482A
RANSPORT
Page 5–33
position. Be careful when
Operation: During Operation
Advertisement
Table of Contents
