Image Prints Too Dark
Probable Causes
One or more of the imaging units may be defective.
One or more of the toner cartridges may be defective.
The printer needs to be calibrated.
Image is Blurred or Stained
Probable Causes
One or more of the imaging units may be defective.
One or more of the toner cartridges may be defective.
Solutions
Remove the imaging units one at a time, and check
for damage. If it is damaged, replace it.
Remove the toner cartridges and check each for
damage. If it is damaged, replace it.
Perform the color calibration procedure. For more
information see
Setting Color Calibration
page 131.
Solutions
Remove the imaging units one at a time, and check
for damage. If it is damaged, replace it.
Remove the toner cartridges and check each for
damage. If it is damaged, replace it.
Phaser 7500 Color Printer
Troubleshooting
on
135
User Guide