Xerox Phaser 7500DN User Manual page 38

Network Basics
Configuring the Printer
To configure the printer:
1. Insert the Software and Documentation CD-ROM into the computer's CD-ROM drive and click
Have Disk.
2. Click the Browse button, and then select the directory which contains the Windows 2000 or
Windows XP drivers.
3. Select the *.INF file, then click Open.
4. Verify that the path and filename are correct, then click OK.
5. Enter a name for the printer and select whether you want that printer to be the default. Click Next.
6. Select one of these options:
If the printer is not shared, click Next.
•
If the printer is shared, enter a Share Name, check the Share box, then click Next.
•
Printing a Test Page
You are prompted to print a test page.
1. Select one of these options:
Click Yes to print a test page, then click Next.
•
Click No if you do not want to print a test page, then click Next.
•
2. Select one of these options in the Completing the Add Printer Wizard screen:
Click the Finish button if the data presented is correct. Proceed to Step 3.
•
Click the Back button to correct the data if incorrect, then click Finish in the Add Printer Wizard
•
when the data is correct. Proceed to Step 3.
3. If you printed a test page, you are prompted to confirm that the test page printed:
Click Yes if the test page printed successfully.
•
Click No if the test page did not print or printed incorrectly.
•
See also:
Windows 2000 or Later Troubleshooting
Microsoft IPP Port
Follow these steps to obtain the printer's URL and create an Internet Printing Protocol (IPP) printer.
Obtaining the Printer's URL (Network Path)
To obtain the printer's URL:
1. Launch your Web browser.
2. Enter your printer's IP address in the browser's Address field.
3. Select Properties.
4. Select the Protocols folder on the left navigation panel.
5. Select IPP. The Network Path field on the IPP Settings page displays the printer's URL.
38 Phaser 7500 Color Printer
User Guide
on page 40