Entire Page Prints Black Or Color; Image Prints Too Light - Xerox Phaser 7500DN User Manual

Troubleshooting

Entire Page Prints Black or Color

Probable Causes
One or more of the the imaging units may be
defective.

Image Prints Too Light

Probable Causes
The density is too light.
The paper is moist from humidity.
Media type is set incorrectly.
Unsupported media (wrong size, thickness, type, etc.)
is being used.
The printer needs to be calibrated.
134 Phaser 7500 Color Printer
User Guide
Solutions
Remove the imaging units one at a time, and check
for damage. If it is damaged, replace it.
Solutions
Select a darker copy density.
Remove the paper and try a fresh ream.
When printing envelopes, labels, heavyweight stock,
or transparencies, specify the appropriate media type
in the printer driver.
Use Xerox-approved media. See
page 55.
Perform the color calibration procedure. For more
information see Setting Color Calibration
page 131.
Supported Media on
on