Lateral Lines Or Bands Print On Image; Colors Look Wrong; Colors Do Not Register Properly - Xerox Phaser 7500DN User Manual

Lateral Lines or Bands Print on Image

Probable Causes
The printer is not level.
The media path is dirty with toner.
One or more of the imaging units may be defective.

Colors Look Wrong

Probable Causes
The printer is not level.
One or more of the imaging units may be defective.
Incorrect driver settings.
One or more of the toners may be low or empty.

Colors Do Not Register Properly

Colors do not register correctly or colors are mixed with page-to-page variations.
Probable Causes
The media is moist from humidity.
Solutions
Place the printer on a flat, hard, level surface.
Print several blank sheets and the excess toner should
disappear.
Remove the imaging units one at a time, and check
for damage. If it is damaged, replace it.
Solutions
Place the printer on a flat, hard, level surface.
Remove the imaging units one at a time, and check
for damage. If it is damaged, replace it.
Check the Color Matching settings in the printer
driver or your application.
Check the Control Panel for a Toner Status message.
If necessary, replace the specified toner cartridge.
Solutions
Remove the moist media and replace it with new, dry
media.
Phaser 7500 Color Printer
Troubleshooting
141
User Guide