Advertisement
INTEGRA/-S/-G/-GS User Manual
Traffic path
23) Clear counters - Allows resetting master and slave path counters. The button is
available only in modify mode.
24) Transmitting – For 2+0 configuration: Indicates whether Master, Slave, or both are
transmitting traffic. For 1+1 configuration: Indicates whether the current role Master
(Local master) or Slave (Alternate Slave) is transmitting.
25) Receiving – For 2+0 configuration: Indicates whether Master, Slave, or both are
receiving traffic. For 1+1 configuration: Indicates whether the current role Master
(Local master) or Slave (Alternate Slave) is receiving.
Master path counters
26) Splitter packets – Indicates the number of packets transmitted by Master FODU.
27) Combiner packets – Indicates the number of packets received by Master FODU.
28) FCS errors on air – Indicates the number of FCS errors received by Master FODU.
Slave path counters
29) Splitter packets – Indicates the number of packets transmitted by Slave FODU.
30) Combiner packets – Indicates the number of packets received by Slave FODU.
31) FCS errors on air – Indicates the number of FCS errors received by Slave FODU.
Slave path counters
32)
By pressing „Execute configuration", changes made to the corresponding section
apply only to the local side Integra/Integra-S/Integra-G/Integra-GS. If „Rollback on" is
selected, the configuration will be reverted in case erroneous configuration changes
are applied.
Configuration example
For 2+0:
192.168.205.100
SAF Tehnika JSC
Configuration for both Slave FODUs
WEB GUI
For 1+1:
192.168.205.200
50
Advertisement
