Advertisement
INTEGRA/-S/-G/-GS User Manual
Hex flange nuts should be evenly aligned on
threaded bolts so that the mounting bracket
7
clamp [9] is tightly attached to the pipe. Tighten
hex flange nuts with torsion not exceeding 20
N·m.
Make sure that both horizontal and vertical
9
alignment eye screws are turned to the mast
before attaching Integra/Integra-G FODU.
11
Connect the vertical alignment eye screw [3] to
the upper groove on Integra/Integra-G housing.
SAF Tehnika JSC
8
10
12
It is recommended to protect the installed radio from
direct sunlight.
INSTALLATION
View of the assembled mounting bracket on the mast
pole.
Attach Integra/Integra-G FODU with the antenna to the
mounting bracket so that side screws fit into the
grooves of the housing clamp [5].
View of the assembled bracket on the mast pole with
Integra/Integra-G FODU attached and secured.
13
Advertisement
