Advertisement
INTEGRA/-S/-G/-GS User Manual
Proprietary notice
The information presented in this guide is the property of SAF Tehnika, JSC. No part of this
document may be reproduced or transmitted without proper permission from SAF Tehnika,
JSC.
The specifications or information contained in this document are subject to change without
notice due to continuing introduction of design improvements. If there is any conflict
between this document and compliance statements, the latter will supersede this document.
SAF Tehnika, JSC has no liability for typing errors in this document or damages of any kind
that result from the use of this document.
To get up to date information about accessories and their availability, please contact a sales
representative.
FODU does not contain serviceable parts. Warranty will not be applicable
in the event FODU has been hermetically unsealed.
SAF Tehnika, JSC is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment.
modifications could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. The operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
−
Increase the separation between the equipment and the receiver.
−
Connect the equipment to an outlet on a circuit different from the one
−
connected to the receiver.
Consult the dealer or an experienced radio/TV technician for help.
−
This device complies with Industry Canada license-exempt RSS standard(s). The operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil
ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Copyright Notice
Copyright © 2023 SAF Tehnika, JSC. All rights reserved.
SAF Tehnika JSC
OVERVIEW
Such
2
Advertisement
