Triumph Bonneville Bobber Owner's Manual page 118

Maintenance
Bonneville Bobber Only
Warning
The bulbs become hot during use.
Always allow sufficient time for the
bulbs to cool before handling. Avoid
touching the glass part of the bulb. If
the glass is touched or gets dirty,
clean with alcohol before reuse.
Caution
The use of non-approved headlight
bulbs may result in damage to the
headlight lens.
Use a genuine
headlight bulb as specified in the
Triumph Parts Catalog.
When possible
replacement headlight bulbs installed
by an authorized Triumph dealer.
cjwm
1. Headlight rim fastener
To replace the headlight and/or position
light bulb:
• Disconnect the battery, negative
(black) lead first.
• Remove the headlight rim fastener.
• Detach the
assembly from the headlight bowl.
118
Triumph supplied
always have
1
headlight and
• While supporting the light unit,
disconnect the multipin electrical
connector from the headlight bulb
and carefully remove the position
light bulb from the light unit.
• Remove the rubber dust cover.
1
cjwl
1. Wire retainer
2. Headlight bulb
3. Position bulb location
• Unhook the headlight bulb's wire
retainer.
• The headlight bulb can now be
removed.
• Remove the position bulb from its
bulb holder if it needs replacing.
• Installation
removal.
• Tighten the headlight rim fastener
to 18 lbf in (2 Nm).
rim
2
3
is the reversal of