Enabling/Disabling Hd Intercom (Default: Enable); Enabling/Disabling Voice Prompts (Default: Enable); Enabling/Disabling Rds Af (Default: Disable); Enabling/Disabling Fm Station Guide (Default: Enable) - Sena SF Sereis User Manual

SF Series

15.7 Enabling/Disabling HD Intercom (Default: Enable)

HD Intercom enhances the two-way intercom audio from normal
quality to HD quality. HD Intercom will become temporarily disabled
when you enter into a multi-way intercom. If this feature is disabled,
the two-way intercom audio will change to normal quality.
Note:
1. The intercom distance of HD Intercom is relatively shorter than that of
normal intercom.
2. HD intercom is active only when Audio Multitasking is disabled.

15.8 Enabling/Disabling Voice Prompts (Default: Enable)

You can disable voice prompts by software configuration settings, but
the following voice prompts are always on.
– Voice prompts for headset configuration settings menu
– Voice prompts for battery level indicator
– Voice prompts for speed dial
– Voice prompts for FM radio functions
40
15.9 Enabling/Disabling RDS AF (Default: Disable) (SF4)
RDS AF allows a receiver to re-tune to the second frequency location
when the first signal becomes too weak. With RDS AF enabled on the
receiver, a radio station with more than one frequency can be used.
15.10 Enabling/Disabling FM Station Guide
(Default: Enable) (SF4)
When FM Station Guide is enabled, FM station frequencies are given
by voice prompts as you select preset stations. When FM Station
Guide is disabled, the voice prompts on FM station frequencies will
not be given as you select preset stations.
15.11 Advanced Noise Control™ (Always On)
The background noise is reduced during an intercom conversation.