Headset Configuration Settings - Sena SF Sereis User Manual

SF Series
Note:
If you select music as the audio source priority, the order of priority will
change as below:
(highest)
(lowest)
*Only available in SF4
34
Mobile phone
Bluetooth stereo music
Intercom
Music sharing by Bluetooth stereo music
FM Radio*

14 HEADSET CONFIGURATION SETTINGS

You can set the configuration of the SF Series by the voice menu
instruction described below.
1. To enter into voice configuration menu, press and hold the Center
Button for 10 seconds until you hear high-toned double beeps.
You will also hear a voice prompt, "Configuration menu."
2. Tap the (+) Button or the (-) Button to navigate between the
menus. You will hear voice prompts for each menu item as below.
3. You can enable/disable a feature or execute a command by
tapping the Center Button.
4. If no button is pressed within 10 seconds, the SF Series will exit
the configuration and go back to stand-by mode.
5. If you want to exit the configuration immediately, tap the (+) Button
or the (-) Button until you hear a voice prompt, "Exit", and tap the
Center Button.