Speed Dialing - Sena SF Sereis User Manual

SF Series
Note:
If you have two phones connected to your headset and you have an
incoming call from the second phone during the call of the first phone, then
you may still receive the call from the second phone. In this case, the call
from the first phone is on waiting mode. If you end a call, then it will
automatically guide you to the first phone call.
6.2

Speed Dialing

You can quickly make a phone call by using the voice speed dial
menu.
1. To enter into the voice speed dial menu, press and hold the (+)
Button for 3 seconds and you will hear a mid-toned single beep
and a voice prompt saying "Speed dial."
2. Tap the (+) Button or the (-) Button to navigate between the
menus. You will hear voice prompts for each menu item.
3. Tap the Center Button to select a voice menu among the followings:
(1) Last number redial
(2) Speed dial 1
(3) Speed dial 2
18
(4) Speed dial 3
(5) Cancel
4. After selecting the last number redial menu, you will hear a voice
prompt, "Last number redial." Then, to redial the last phone call
number, tap the Center Button.
5. To call one of the speed dials, tap the (+) Button or the (-) Button
to navigate between the menus until you hear a voice prompt
saying "Speed dial (#)." Then, tap the Center Button.
6. If you want to exit the speed dial immediately, tap the (+) Button
or the (-) Button until you hear a voice prompt saying "Cancel",
and tap the Center Button. If you do not press any button within
15 seconds, the SF Series will exit the voice speed dial menu and
go back to stand-by mode.
Note:
1. Make sure that you connect the mobile phone and the headset to use the
speed dial function.
2. You need to assign speed dial numbers before using the speed dial
(please refer to section 15.1, "Assigning Speed Dial").