Gps Pairing; Delete All Bluetooth Pairing Information; Remote Control Pairing; Universal Intercom Pairing - Sena SF Sereis User Manual

SF Series

14.3 GPS Pairing

Voice Prompt
Factory Default
To go into GPS pairing mode, tap the (+) Button or the (-) Button until
you hear a voice prompt, "GPS pairing." Please refer section 6.3.1,
"GPS Pairing" for details on GPS pairing. If you tap the (+) Button or
the (-) Button, you can exit from the GPS pairing mode.

14.4 Delete All Bluetooth Pairing Information

Voice Prompt
Factory Default
Execute
To delete all Bluetooth pairing information of the SF Series, tap the (+)
Button or the (-) Button until you hear a voice prompt, "Delete all
pairings", and tap the Center Button to confirm.
36
"GPS pairing"
N/A
"Delete all pairings"
N/A
Tap the Center Button

14.5 Remote Control Pairing

Voice Prompt
Factory Default
Execute
To enter into remote control pairing mode, tap the (+) Button or the (-)
Button until you hear a voice prompt, "Remote control pairing." Then
tap the Center Button to enter into remote control pairing mode. The
headset will automatically exit from the configuration menu.

14.6 Universal Intercom Pairing

Voice Prompt
Factory Default
Execute
To enter into universal intercom pairing mode, tap the (+) Button or the
(-) Button until you hear a voice prompt, "Universal intercom pairing."
Then tap the Center Button to enter into universal intercom pairing
mode. The headset will automatically exit from the configuration menu.
"Remote control pairing"
N/A
Tap the Center Button
"Universal intercom pairing"
N/A
Tap the Center Button