Printer Settings; Controlling Startup Page Printing - Xerox Phaser 6300 Advanced Features Manual

Printer Settings

This section includes:
■

Controlling Startup Page Printing

■ Selecting Tray 1 (MPT) Behavior
Setting the Duration for Tray 1 (MPT) Prompts
■
■ Setting the Duration for Tray 2 - 5 Prompts
■ Changing the Power Saver Timeout
Changing the Power Saver Timeout
■
■ Changing Intelligent Ready Mode
■ Changing the Load Paper Timeout
■ Setting the Control Panel Language
■ Setting the Printer Date and Time
■ Setting the Timing for the Low Toner Warning Message
Note: Print the Menu Map to view the path to select other menu options.
Controlling Startup Page Printing
The printer can produce a Startup page each time the printer is turned on or reset. The factory
default is On. You can print the Startup page at any time from the
To turn on/off automatic printing of the Startup page, use one of the following options:
The printer's control panel
■
■ CentreWare IS
Using the Control Panel
To turn on/off automatic printing of the Startup page on the control panel:
1. Select Printer Setup, and then press the OK button.
2. Select Printer Controls, and then press the OK button.
Startup Page
The
3. Press the OK button to change the setting.
on page 5-2
on page 5-3
on page 5-5
on page 5-6
on page 5-6
on page 5-7
on page 5-8
on page 5-9
on page 5-9
is highlighted. The end of the line displays the setting
Phaser® 6300/6350 Color Laser Printer
5-2
on page 5-4
on page 5-10
Information Pages
Printer Settings
menu.
or Off).
(On