Xerox Phaser 6300 Advanced Features Manual page 56

Enabling or Using TCP/IP or AppleTalk for Mac OS X, Version
10.2 and Higher
Verify that you are running Mac OS X, version 10.2 or higher. The previous versions of
Mac OS X do not fully support PostScript printing and printer features.
Setting Up the Macintosh Ethernet Port for TCP/IP
To set up your Macintosh for TCP/IP:
1.
Select Network from the System Preferences application.
2.
Select Built-In Ethernet from the Show menu.
3.
Specify how you will obtain the IP address from the TCP/IP tab:
Manually: Specify the IP address, Subnet Mask, Router Address, and Name Server
■
Address in the dialog box.
■ Using DHCP: Automatically finds the IP address.
4.
Click Apply, and then close the dialog box.
Setting Up the Macintosh Ethernet Port for AppleTalk
To set up your Macintosh for AppleTalk:
1.
Select Network from the System Preferences application.
2.
Select Built-In Ethernet from the Show menu.
3.
Select Make AppleTalk Active in the AppleTalk tab.
4.
Click Apply, and then close the dialog box.
Phaser® 6300/6350 Color Laser Printer
4-23
Macintosh