Quick Cd-Rom Install Steps; Other Methods Of Installation - Xerox Phaser 6300 Advanced Features Manual

See also:

Quick CD-ROM Install Steps

Other Methods of Installation

Quick CD-ROM Install Steps
To use quick CD-ROM installation:
1.
Insert the Software and Documentation CD-ROM into the computer's CD-ROM drive. If
the installer does not launch, do the following:
a.
Click Start, and then click Run.
b. In the Run window, type: <CD drive>:\INSTALL.EXE.
2. Select your desired language from the list.
3. Select Install Printer Driver.
4.
Click I Agree to accept the Xerox Software License Agreement.
5. In the Select Printer dialog box, the default Use Walk-Up Technology (recommended
for network printers) is selected. Click Next.
6. Follow the Use Walk-Up Technology instructions displayed.
7.
Click Exit Program.
Note: If the Walk-Up Technology dialog box remains onscreen after you have completed
Steps 1–6, click the Cancel button, and then click Select from the following discovered
printers. Follow the onscreen prompts to complete the installation procedure.
Other Methods of Installation
Install your printer on a Windows 98 SE or Windows Me network using PhaserPort software.
PhaserPort Software
The Windows installer installs PhaserPort for Windows (for those installations using
PostScript drivers). PhaserPort for Windows is a Xerox print monitor for printing over
Windows 98 SE or Windows Me TCP/IP peer-to-peer networks. PhaserPort can be used to add
or remove TCP/IP ports.
Note:
PhaserPort is the preferred utility for PostScript installations.
Adding a Port
To add a printer port:
1. Open Printer Properties for the printer you would like to attach to the new TCP/IP port.
2.
Click Start, click Settings, and then click Printers.
3. Right-click the printer to be attached to the new TCP/IP port, and then click Properties.
on page 4-17
on page 4-17
Phaser® 6300/6350 Color Laser Printer
4-17
Windows 98 SE and Windows Me