Xerox Phaser 6180 User Manual page 103

Item Description
Line Termination Sets the line termination.
Off (default)
■
The line termination command is not added.
CR=CR, LF=LF, FF=FF
Add-LF
■
The LF command is added.
CR=CR-LF, LF=LF, FF=FF
Add-CR
■
The CR command is added.
CR=CR, LF=CR-LF, FF=CR-FF
CR-XX
■
The CR and LF commands are added.
CR=CR-LF, LF=CR-LF, FF=CR-FF
Output Color Specifies the color mode to Color or Black. This settings is used when the color
printing mode setting is not specified for the print job that is sent to the printer.
Black (default)
■
Prints in black and white mode.
Color
■
Prints is the color mode.
Control Panel
Specifies whether to limit menu operations with a password to avoid changing the printer
settings by accident.
Item
Panel Lock
Description
Specifies whether to limit the menu operations with a password. Selecting
On requires the operator to enter the password. If On is set, then you must
enter the password to use the Admin Menu. The default is Off.
Phaser® 6180 Color Laser Printer
5-15
Description of Menu Items