Xerox Phaser 6180 User Manual page 53

Make sure of the following points to avoid any troubles during printing.
■ Do not load different types of paper at the same time.
Use high quality paper for laser printers to print at high quality. See
■
page 4-5.
■ Do not remove or add paper to Tray 1 (MPT) when printing, or if there is any paper still in
the tray. Doing so may cause a paper jam.
■ Do not put any objects other than paper on Tray 1 (MPT). Also, do not push or force down
Tray 1 (MPT).
■ Always load paper short-edge feed.
To load paper in Tray 1 (MPT):
1. Gently pull open the Tray 1 (MPT) cover.
2. Slide the width guides to the edge of the tray. The width guides should be fully extended.
Phaser® 6180 Color Laser Printer
4-10
Loading Paper
About Paper on
6180-018
6180-019