Control Panel Error Messages; Messages About Supplies - Xerox Phaser 6125 User Manual

Control Panel Error Messages

This section describes the messages displayed on the control panel.

Messages About Supplies

Message
Replace Fuser
010-351
Restart Printer
010-359
Fuser Error
Restart Printer
010-317
Insert Fuser
Restart Printer
093-NNN
Insert XXX Cartridge
093-NNN
Check XXX Cartridge
093-NNN
Insert XXX Cartridge
Insert Imaging Unit
Replace Imaging Unit
Restart Printer
NNN-NNN
Replace XXX
Toner Cartridge
XXX indicates one of the following: the Yellow Toner (Y), Cyan Toner (C), Magenta Toner (M),
Black Toner (K), or fuser.
NNN indicates a numeric value.
Condition/Reason/Action
Time to replace the fuser.
Replace the old fuser with a new one.
The fuser is not installed correctly or is not working correctly due
to damage or malfunction.
Reinstall the fuser.
The fuser is not installed.
Install the fuser.
The XXX toner cartridge is not installed correctly or is not working
correctly due to damage or malfunction.
Reinstall the toner cartridge.
Sealing tape is still attached to the XXX toner cartridge.
Remove the sealing tape from the displayed toner cartridge.
The XXX toner cartridge is not installed correctly or is not working
correctly due to damage or malfunction.
Reinstall the toner cartridge.
See Checking/Managing the Printer with CentreWare IS
page 8-5.
The imaging unit is not installed.
Install the imaging unit.
See Checking/Managing the Printer with CentreWare IS
page 8-5.
Time to replace the imaging unit. Replace old imaging unit with
new one.
The fuser is not installed correctly or is not working correctly due
to damage or malfunction.
Reinstall the fuser.
The toner cartridge has become empty.
Replace the old toner cartridge with a new one.
Phaser® 6125 Color Laser Printer
7-11
Control Panel Error Messages
on
on