Moving The Printer - Xerox Phaser 6180 User Manual

Moving the Printer

Carry out the following procedure when moving the printer.
To view precautions and guidelines for safely moving your printer, see
page 1-2.
The printer, configured with the optional accessories, paper trays, consumables and paper,
weighs 29.5 kg (64.5 lb.). When moving the equipment, make sure that there are two or more
persons carrying it.
When lifting the printer, be sure to observe the following points. Failure to do so may cause the
printer to fall and result in injuries.
Two persons, one facing the front of the printer (control panel) and the other facing the back,
should firmly grip the recessed areas on the bottom part of both sides of the printer. Never try
to lift the printer by gripping any other areas.
Warning: If the 550-Sheet Feeder (optional) has been installed, uninstall it before moving the
printer. If these are not fixed securely to the printer, they may fall to the ground and cause
injuries. For details on how to uninstall the options, refer to the instructions sheet that is
bundled with each option.
Note: The front side of this printer is heavier than the rear. Take note of this difference in
weight when moving the printer.
29.5 kg
64.5 lb.
Phaser® 6180 Color Laser Printer
8-10
Moving the Printer
User Safety on
6180-040