Xerox Phaser 6180 User Manual page 93

Settings Exclusive to Tray 1 (MPT)
Item Description
Display Popup Specifies whether or not to display the message that prompts you to set the paper
size and type every time you load paper in the Tray 1 (MPT).
When you select On, the message that prompts you to set the paper size and type
is displayed.The default is Off.
MPT Mode Specifies the way to set the paper type and size settings to be loaded in
Tray 1 (MPT).
Panel Specified (default)
■
You can specify the paper type and size settings on the control panel. Printing
can be done only when the settings on the print driver matches the settings on
the control panel. When a mismatch of paper sizes occurs, follow the
instructions displayed on the control panel.
DriverSpecified
■
You cannot specify the settings on the control panel. Printing is done using the
settings on the print driver.
When the size or type of paper that is loaded is different from the setting, the print quality may
fall or paper may jam. Specify the correct paper type and size.
When installing the optional sheet feeders if Paper Tray is set to Auto on the print driver, the
feeding tray is automatically specified according to the setting on the control panel. Also,
when the paper size and type setting for each tray is the same, printing continues by changing
the feeding tray if the paper in the specified tray has run out.
Phaser® 6180 Color Laser Printer
5-5
Description of Menu Items