Replacing The Accumulator - Honeywell Envitec AlcoQuant 6020 plus Operating Instructions Manual

Table of Contents

Advertisement

AlcoQuant 6020 plus

5.2.4 Replacing the accumulator

To replace the accumulator, the cover must be removed and the accumulator cable
disconnected. The accumulator compartment holds a block of 4x Honeywell Healthcare
Solutions GmbH Nickel-Metallhydride rechargeable batteries (NiMH) 4.8 V (4x 2100 mAh).
The entire accumulator block must be replaced. The battery block is then reinserted into the
case, the accumulator cable connected and the cover closed again.
Disposing of the device, alcohol sensor, battery/accumulator
Do not dispose of the device and alcohol sensor as household waste. Please return all of
them to Honeywell Healthcare Solutions GmbH clearly labelled "ENTSORGUNG (Please
dispose of)".
The batteries/rechargeable batteries must be disposed of in accordance with the European
Battery Directive (EU 91/157/EEC) as special waste.
Honeywell Healthcare Solutions GmbH
Alter Holzhafen 18
23966 Wismar, Germany
Do not throw batteries into fire or force them open. Risk of explosion!
30
Doc no.: 059-07-1001779_A6020plus_GB-5.2.1 / 12.2021

Advertisement

Table of Contents
loading

Table of Contents