Table of Contents
Advertisement
3.4
Printer Test
3.5
Information
3.5.1 Start text
The personalised start text is entered using the PC software.
Doc no.: 059-07-1001779_A6020plus_WL_GB-5.2.1 / 12.2021
Select main menu item >Printer Test<.
Confirm with >OK<.
Press >Print< to for a test printout. Whether >Cable< or >Wireless<
printing is used, depends on the option that has been selected in
>Printer Setup<.
The AlcoQuant 6020 plus will identify itself on the printout with its
own serial number.
If wireless printing is activated, the upper status line will display a
wireless symbol. The wireless printer has to be set ready-to-receive
prior to the test print. If no connection with the printer is established
within 30 seconds, the print test will be aborted with an error
message.
Select >Start text< from the >Information< menu.
Confirm the >Start text< selection with >OK<. The entered start text
is shown.
This start text is displayed when the device is switched on. This text
enables an assignment to an office, person or general device
identification.
No start text is set.
AlcoQuant 6020 plus
15
Advertisement
Table of Contents
