Advertisement
1
Explanation of symbols
WARNING!
Safety instruction: Indicates a hazardous situation that, if not avoided,
could result in death or serious injury.
CAUTION!
Safety instruction: Indicates a hazardous situation that, if not avoided,
could result in minor or moderate injury.
NOTICE!
Indicates a situation that, if not avoided, can result in property damage.
NOTE
Supplementary information for operating the product.
2
General safety instructions
The manufacturer accepts no liability for damage in the following cases:
• Physical damage to the product.
• Damage due to incorrect installation.
• Alterations to the product.
• Use for purposes other than those described in the operating manual.
Read and understand all instructions included with the system prior to use.
3
Fitting Templates
WARNING!
It is not recommended to use the bulkhead components as a drill
jig. Cut out then tape the template in place at the desired location
on the hull. Use a center punch on all hole centers.
NOTE
Pilot holes for the screws require a countersink to prevent
fiberglass cracking when screws are tightened.
2
Field Installed Bulkhead Fitting Kits
EN
Advertisement
