Dometic 9500E Installation Instructions Manual
Dometic 9500E Installation Instructions Manual

Dometic 9500E Installation Instructions Manual

(12 vdc) power case, cassette awning model 231(ll)(cc).003(#)

Advertisement

Quick Links

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Important Safety Instructions and Document Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
A . Product Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
B . Door Clearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
C . Awning Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
A . Installing The Mounting Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
B . Installing The Wiring And Electrical Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
C . Installing The Awning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
D . Testing The Motor And Remote Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
E . Testing The Wind Sensor Functionality (If Equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Adjustments (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
A . Adjusting The Fabric Slope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
B . Adjusting The Lateral Arm Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
C . Adjusting The Lead Rail Alignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
D . Adjusting The Awning Open/Close Limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Read these instructions carefully. These instructions MUST stay with this product.
REVISION E
Form No. 3316981.000 3/19
(French 3316983.000_E)
©2019 Dometic Corporation
LaGrange, IN 46761
(12 VDC) Power Case/Cassette Awning
Model 231(LL)(CC).003(#)
USA & CANADA
SERVICE OFFICE
Dometic Corporation
1120 North Main Street
Elkhart, IN 46514
9500E
INSTALLATION
INSTRUCTIONS
SERVICE CENTER &
DEALER LOCATIONS
Visit:
www.Dometic.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 9500E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Dometic 9500E

  • Page 1: Table Of Contents

    Read these instructions carefully. These instructions MUST stay with this product. REVISION E USA & CANADA SERVICE CENTER & Form No. 3316981.000 3/19 SERVICE OFFICE DEALER LOCATIONS (French 3316983.000_E) Dometic Corporation Visit: ©2019 Dometic Corporation 1120 North Main Street www.Dometic.com LaGrange, IN 46761 Elkhart, IN 46514...
  • Page 2: Introduction

    . This product can be installed by one person with brief help from additional person- nel . Use these instructions to ensure correct installation and function of the product . Dometic Corporation reserves the right to modify appearances and specifications without notice . IMPORTANT SAFETY INSTRUCTIONS AND DOCUMENT SYMBOLS This manual has safety information and instructions to help you eliminate or reduce the risk of accidents and injuries .
  • Page 3: General Information

    GENERAL INFORMATION REQUIRED TOOLS Drill (optional) 6 mm Hex Key/Driver/Bit Torque Wrench 6 mm Hex Key Socket Phillips Screwdriver/Bit 10 mm Socket 3 mm Hex Key/Driver/Bit REQUIRED HARDWARE (8'–16' MODELS) (1) Mounting Bracket (12) M6 Flat Washer (12) M6 x 50 mm L Carriage Bolt (12) M6 Locknut With Nylon Insert (12) M6 Split Lock Washer (6) #8-18 x 0 .38 Self-Drilling Flat-Head Screw...
  • Page 4: Installation

    SPECIFICATIONS HOLE PATTERN LOCATIONS FIG. 2 (Rear View) (Right End) (Left End) 1-3/8" 6-3/8" 1-3/8" 6-3/8" 60-7/8" 50-5/8" 60-7/8" 69-1/4" 79" 116-3/8" 4" (Depth) 94-3/4" 115-1/4" 132" 151-5/8" 180-1/4" 191" 101-1/8" 121-5/8" 138-3/8" 158" 186-5/8" 197-3/8" INSTALLATION  IMPACT OR CRUSH HAZARD . Make sure mounting surface on RV is flat, has solid structural backing where fasteners penetrate surface, and will safely and securely support product .
  • Page 5 INSTALLATION Mounting To A Solid Structure Mounting To A Non-Solid Structure FIG. 1 FIG. 2 RV Wall With RV Wall With RV Wall Non-Solid Structure Solid Structure (-) 1/16" Cut Line Sleeve Carriage Bolts Backing Plate (+) 9/16" Cut Line Mounting Mounting Bracket Sleeves Bracket...
  • Page 6: Installing The Wiring And Electrical Kits

    INSTALLATION B. Installing The Wiring And Electrical Kits  Failure to obey the following warnings could result in death or serious injury: • ELECTRICAL SHOCK HAZARD . Disconnect 120 VAC power from RV . • IMPACT OR CRUSH HAZARD . Do NOT install product without also installing an ignition/safety interlock system . Otherwise, acci- dental operation during transit could occur .
  • Page 7: Installing The Awning

    INSTALLATION RH End Cap STEP 2 STEP 3 Back Rail Wiring Hole Wiring Awning Motor Wiring Grommet 4-1/4" RV Wall Mounting Bracket (Rear View) (Rear View) Mounting Bracket The distance from the end of the bracket to the end of the • Drill a 5/8" hole at the intersection of the horizontal and back rail may not be constant .
  • Page 8: Testing The Motor And Remote Functionality

    INSTALLATION STEP 3 STEP 4 Back Rail Mounting Bracket Self Drilling Screw • Turn on the power to the RV and extend the awning 1' to • Install the remote holster in a protected area using two verify the back rail is contacting the mounting bracket . screws .
  • Page 9: Testing The Wind Sensor Functionality (If Equipped)

    INSTALLATION E. Testing The Wind Sensor Functionality (If Equipped) PINCH HAZARD . Maintain a horizontal distance of at least 16" between fully open awning and any permanent object . Failure to obey this caution could result in injury . STEP 1 Wind Sensor Lead Rail...
  • Page 10: Adjusting The Lateral Arm Assemblies

    ADJUSTMENTS (OPTIONAL) B. Adjusting The Lateral Arm Assemblies  IMPACT OR CRUSH HAZARD . Make sure lead rail and lateral arm assemblies are supported securely before loosening fasteners . Do NOT completely remove fasteners, or loosen them so far that shoulder base will disengage from shoulder bracket . Oth- erwise, the lead rail and lateral arm assemblies could shift or drop quickly and unexpectedly, or lateral arm assemblies could extend to the side (beyond awning perimeter) quickly and unexpectedly .
  • Page 11: Adjusting The Lead Rail Alignment

    ADJUSTMENTS (OPTIONAL) C. Adjusting The Lead Rail Alignment D. Adjusting The Awning Open/Close Limits STEP 1 STEP 1 Extension RH End Cap Adjustment Screw (Side View) Wrist Bracket Lead Rail Retraction Adjustment Screw Lateral Arm Adjustment Assembly Screw RH End (Bottom) Wrist Pivot •...

Table of Contents