Safety Precautions - Dymo LabelWriter 450 Turbo User Manual

Safety Precautions

Read and understand all of the precautions listed below. Follow all warnings and instructions
marked on the product.
General
•
•
•
•
•
•
•
•
•
•
Power
•
•
•
•
•
•
•
Printer
•
•
•
•
•
Dispose of plastic bags correctly and keep away from babies and children.
Place the product on a flat, stable surface.
Always use the product as instructed in this user guide.
Unplug the power cord immediately if you notice any abnormal odor, heat, smoke,
discoloration, deformation or anything unusual while using the product.
Do not disassemble the product. For inspection, adjustment and repair of the product, contact
DYMO Customer Support.
Do not drop, hit, or otherwise mishandle the product.
Do not allow any liquids to come into contact with the product.
Make sure to turn off the power, if applicable, and remove the power cord from the electrical
outlet before cleaning the product. Failure to do so could cause an electrical shock or fire.
Do not insert foreign objects into the product.
Do not use paint thinner, benzene, alcohol or any other organic solvents to clean the product.
Doing so may cause damage to the surface finish. Use a soft, dry cloth to clean the product.
Use only the power adapter listed in this user guide:
LabelWriter 450, 450 Turbo, 450 Twin Turbo, and 450 Duo: Adapter model DSA-42PFC-
24 2 240175 from Dee Van Enterprise Co., Ltd..
LabelWriter 4XL: Adapter model DSA-96PFB-24 2 240375 from Dee Van Enterprise Co.,
Ltd.
Do not handle the power cord or adapter if your hands are wet.
Do not cut, damage, alter, or place heavy objects on the power cord.
Do not use the power cord or adapter if they are damaged.
Do not pull the power cord when removing the plug from the electrical outlet. Doing so could
cause an electrical shock or fire.
Do not use the power adapter in a confined space or cover it with a cloth. Make sure there is
sufficient ventilation to prevent the power adapter from overheating.
If the product will not be used for an extended period of time, remove the power cord from the
electrical outlet.
Do not put fingers in moving parts or openings of the product.
Do not block or insert objects into the label exit slot.
Do not touch the tear bar. Personal injury could result.
Do not place the product in areas exposed to direct sunlight, near heaters or other hot
appliances, or in any area exposed to extremely high or low temperatures, high humidity, or
excessive dust.
Do not hold or lift the product by the cover.
Safety Precautions
iv