Dymo LabelWriter 450 Twin Turbo Hardware Manual

KnT Loading Dymo Labels 1
http://www.keepntrack.com/mediawiki/index.php/Loading_Printer_Labels_and_Paper
KeepnTrack - Hardware:

Loading Dymo Labels

(& Receipt Paper)
Learn how to load labels and receipt paper into your Dymo printer.
NOTE: This video shows the DYMO LabelWriter 450 Twin Turbo.

Setting Up

Be aware you should be using specific labels, the COMPanion
Yellow Badge Labels (part number V6101), or specific paper, the
Continuous Wide Student Pass Paper (part number V6301).
Open the printer by lifting the cover and remove any packing
materials.
After unpacking your printer and plugging it in, you should see two
blue lights in the front. These are called form-feed buttons. Press
them now to eject the protective labels.
You can also press the arrow buttons to remove the labels
backwards, or gently pull the labels through by hand.

Loading the Labels

Look inside the printer and you will see directions that will help
you with the next step.
Load the labels onto the spool with the labels feeding from below,
and with the little hole on the left.
Making sure that the roll is positioned tightly on the spool with no
gap between the roll and the spool.