Transparencies; Guidelines - Xerox Phaser 4500 Reference Manual

Transparencies

This topic includes:
■ "Guidelines" on page 2-28
"Printing Transparencies from Trays 1-4" on page 2-28
■
Xerox Clear Transparencies can be printed from any tray. They should be printed on one side
only. To order Xerox Clear Transparencies, contact your local reseller.
Videos are available with instructions for loading transparencies. Videos are
located on the User Documentation CD-ROM and at
4500support.

Guidelines

Remove all paper before loading transparencies in the tray.
■
■ Do not load transparencies above the fill line; it may cause the printer to jam.
■ Handle transparencies by the edges using both hands to avoid fingerprints and creases
which can cause poor print quality.
■ Do not use transparencies with stripes on the side.
■ Change the paper type at the front panel for all trays.
■ Use Xerox Clear Transparencies; print quality may vary with other transparencies.
For more information on paper types, weights, and sizes, go to
Papers on the User Documentation CD-ROM.
Printing Transparencies from Trays 1-4
1. Pull the tray completely out of the printer.
Copyright © 2004 Xerox Corporation. All Rights Reserved.
Phaser™ 4500 Laser Printer
Reference/Printing/Supported
4500-001
2-28
www.xerox.com/office/