Repeating Defects
Refer to the table below if you observe a repeating defect, appearing multiple times at regular
intervals on the page, on your print jobs.
Recurring Marks, Spots, Lines, or Voids
Replace this Supply...
Print Cartridge
Transfer Roller
Fuser
Different supplies may create print defects with similar measurements. To identify the faulty
supply:
1.
Replace the print cartridge (do not discard the packaging).
2.
If the problem continues, then remove and repackage the new print cartridge.
3.
Reinstall the original print cartridge, then replace the maintenance kit (fuser and transfer
roller).
4.
If the problem continues, contact your Customer Support Center.
if the defect occurs every:
38 mm (1.5 in.)
52 mm (2.0 in.)
94.4 mm (3.72 in.)
51 mm (2.0 in.)
94.2 mm (3.7 in.)
Phaser™ 4500 Laser Printer
4-29
Print-Quality Problems