Xerox Phaser 4500 Reference Manual page 47

3. Extend the tray to accommodate legal or US Folio (legal 13) paper by moving the release
tabs to the sides of the tray and pulling out on the front of the tray. Contract the tray by
moving the release tabs to the sides of the tray and pushing in the front of the tray.
4. Load the paper, transparencies, or other specialty media in the tray.
Note
Do not load paper, transparencies, or specialty media above the fill lines inside the
tray. Only use paper, transparencies, or specialty media that are flat. If frequent
jamming occurs with card stock or heavier paper that is less than 175 mm (7 in.) long,
reduce the number of sheets in the tray.
4500-090
4500-087
Phaser™ 4500 Laser Printer
2-16
Basic Printing
4500-091
4500-086