Changing Paper; Guidelines; Tray Setup - Xerox Phaser 4500 Reference Manual

Changing Paper

This topic includes:
■ "Guidelines" on page 2-2
"Tray Setup" on page 2-2
■
The paper trays adjust to accommodate most sizes and types of paper, transparencies, or other
specialty media. For more information about loading paper, go to
Printing on User Documentation CD-ROM.
Caution
If you change the type of paper in a tray, you must change the paper type and size on the
front panel to match the paper that you loaded. If you fail to do this, print-quality
problems can occur and the fuser can be damaged.

Guidelines

After loading any tray and adjusting the paper guides, set the paper type and size as required at
the front panel. All trays require front panel settings for both paper type and size.
■ Do not overload the paper tray. See the tray label for the maximum fill line indicators.
■ If excessive jams occur, turn the paper or media over. If jams continue to occur, use paper,
transparencies, or other specialty media from a new package.
■ Use only paper envelopes. Do not use envelopes with plastic windows or metal clasps.

Tray Setup

1.
When loading paper, transparencies, or other specialty media in a tray, pull the tray
completely out of the printer.
Copyright © 2004 Xerox Corporation. All Rights Reserved.
Phaser™ 4500 Laser Printer
Reference/Printing/Basic
4500-001
2-2