Advertisement
Page 4 of 7
6
1. Close the cover
7
fix new components
8
!
Replacement and maintenance
Warning: Switch off main power supply before maintenance
Danger: electricity
fix new components
Replacement of driver and SPD
remove old components
fix new components
Lock Gear cover
2. Press the cover
Warning: Put gasket in order then
press down the gear cover and
rotate the knob to locking position.
3. Turn the knob
and lock the cover
mounting torque
1.5N· M
remove old components
remove old components
remove old components
fix new components
23-07-2021
Approved
Advertisement
