Advertisement
Page 4 of 5
6
1. Close the cover
合上上盖
7
fix new components
用于替换的新零件
8
remove old components
移除损坏的零件
Lock Gear cover
Warning: Put gasket in order then
press down the gear cover and
!
rotate the knob to locking position.
警告：确认密封带放在恰当的位
置后压下上盖，然后旋转旋钮锁
紧上盖。
Warning: Switch off main power supply before maintenance
Danger: electricity
Replacement of PCB
替换损坏的PCB灯板
Replacement of driver and SPD
替换损坏的驱动和SPD
fix new components
用于替换的新零件
锁紧上盖
2. Press the cover
手压上盖
警告：维护前请切断电源
Replacement of PC diffuser
替换损坏的透镜
3. Turn the knob
and lock the cover
旋紧旋钮，锁紧上盖。
remove old components
移除损坏的零件
remove old components
移除损坏的零件
fix new components
用于替换的新零件
15-12-2021
23-02-2021
Approved
Approved
Advertisement
