Tektronix Phaser 360 User Manual page 40

5.
Fill in the fields (refer to the following table). To process the information, press Enter.
Make sure that SMIT finishes with an OK in the upper-left corner. To return to the first
Printer/Plotter Devices menu, press F3.
Field name
Attachment Type
Type of Remote Printing
Remote Printer Type
Name of NEW print queues to add
HOSTNAME of remote server
Name of QUEUE on remote server
TYPE of print spooler on remote
server
Send PASS-THROUGH FLAG to
queue on remote server?
Hewlett-Packard HP-UX 9.x and 10.x
1.
Log in as root on your workstation.
2.
Make a backup copy of the /etc/hosts file.
Note
You need superuser privileges to edit this file.
3.
Edit /etc/hosts and add a line that defines the printer's IP address and its remote machine
name.
The IP address you enter here for the printer must be the same address you
specified as the Tektronix printer IP address when you configured the printer.
For example:
192.1.1.2 tekphaser
In this example, 192.1.1.2 is the printer's IP address and tekphaser is the printer's
remote system name.
4.
Use the HP System Administrator Manager program (SAM) to configure an HP
workstation. From the command line, type: sam.
PhaserShare Networking Manual
TCP/IP Host Configuration (UNIX)
Description
Select remote.
Select Local filtering before sending to
print server.
Select Other, then generic.
Use the down-arrow key to move down to
PostScript, then enter the print queue name
on the right side. This can be anything.
The name that you entered in your
/etc/hosts file as the remote machine name.
Queue name that the printer recognizes:
PS for PostScript
PCL for text
HPGL for HP7475A
AUTO for automatic selection.
Press F4 and select BSD.
Select F4 and select no.
35