Introduction; Objective; Requirements - Xerox DocuPrint N4025 Information Manual

Introduction

Introduction

Objective

Requirements

3-2 DocuPrint Technical Information Guide
The purpose of this chapter is to direct you to the best
information on Print Server Installation and Initial
Testing. Also Troubleshooting (if required) is provide for
the setup of your DocuPrint printer operating under the
various Novell NetWare versions.
This task would ordinarily be performed by an
experienced System Administrator.
The objective of this chapter is to help you find the
required information to enable you to connect and set up
your DocuPrint printer on your network as quickly as
possible.
In general, the requirements needed for printer
connection and setup include:
• A workstation with the Windows operating system
software installed for that station and a working
knowledge of the operating system.
• CentreWare DP and appropriate print driver software
loaded on your workstation.
• For a NetWare 3.1X or later network running the IPX
protocol, you must be logged in with SUPERVISOR or
ADMIN privileges.
• The DocuPrint Network printer or your printer with a
Xerox CentreDirect External Print Server (External
Ethernet Adapter) installed, together with appropriate
cabling to link the printer to your network.
• A Configuration Sheet from your DocuPrint printer.
Refer to Chapter 2: Connecting to Your Network
details on network information, as well as how to print a
Configuration Sheet.
for